Where it all started

James O'Donnell and Tony O'Donnell

How James O’Donnell Revolutionised Actuator Production.

James O’Donnell, the man who devised the revolutionary ‘Smart Actuator’, the Actuator that delivers a 75% power saving on standard models, has always been an inventor. As a child he loved tinkering with electronics kits and ‘educational toys’. Growing up with the internet, it was natural that his inquisitive mind took him into a degree in computer science and business studies. And he has been tinkering ever since.

The inspiration for this life-changing innovation came whilst playing with a Scalextric car. While examining how to make the motor more efficient on the track, James realised that his thinking could have much wider implications. The detail was, for a long time, a closely guarded secret and following that eureka moment, much of James’s time has been spent with lawyers ensuring the technology can be patented across the globe.

James O'Donnell and Tony O'Donnell

The next stage was for James to understand the applications of this discovery. James’s father, Tony, runs a successful computer maintenance company. So, using parts lying around in the workshop and utilising a deep knowledge of computers – and their insides – he added some complex electronics to this motor configuration and the very first electric motor system was created in the Rift Lab.

Together with Tony and a family friend who just happened to have over 25 years of experience on the valve actuator industry, they looked for ways to use this new technology. The team worked together to see if this motor could be used to revolutionise this market. They realised that the market had not seen significant mechanical or technological innovation for many decades and much the same product configuration is sold across the world.

Both James and Tony are fans of the concept of ‘disruptive technologies’ and they began looking in more detail at the actuator’s design – something which has not fundamentally changed for many decades.

As James explains, the challenge was to bring fresh thinking to an old, traditional product: ‘I started this exercise with a relatively simple aim to develop a part-turn electric actuator, capable of delivering a range of torque outputs (from 20 to 100Nm) with an operating time of 4 seconds and which complies with all the appropriate market regulations in the different markets round the world.

Very quickly I realised it seemed difficult or even impossible to turn 100Nm in 4 seconds without spending a huge amount of money on a motor. The motors capable of realistically turning 4 seconds were too slow and the motors with the speed to do the job did not have the required torque within a budget which could produce a competitive product. ‘ James O’Donnell

James set about analysing the market and taking apart a number of actuators from across the world.

He concluded that in most entry level actuators half of the cost goes in the motor, and the other half is equally split between electronics – usually simple power supply and relays – and mechanics.

He continues: ‘If we take an objective look at what an actuator is, we can see it is simply a means of converting electricity into rotary motion. We can also quite quickly determine that there is a relationship between current and torque, and a relationship between volts and speed. Although this is a simplification it is useful shorthand for understanding this problem.

‘I found splitting the current between a range of smaller electric machines enables the core components of those machines to be utilised much more efficiently. A combination of smaller motors working together allows them all to operate more efficiently in terms of resources, energy usage and the overall cost than a single machine.

‘Once this realisation was made we could adjust the core budget to significantly enhance the electronics inside the model and vastly enhance the features available from the end unit – while keeping the cost broadly the same.

‘I found splitting the current between a range of smaller electric machines enables the core components of those machines to be utilised much more efficiently. A combination of smaller motors working together allows them all to operate more efficiently in terms of resources, energy usage and the overall cost than a single machine.

‘Once this realisation was made we could adjust the core budget to significantly enhance the electronics inside the model and vastly enhance the features available from the end unit – while keeping the cost broadly the same.

‘ We end up with a unit which can turn over 100Nm in under 2 seconds. Utilising the motors close to their optimum efficiency, we have found demonstrates a significant energy usage reduction of approximately 75 per cent against most existing units. This lets us shift the paradigm within the actuator market allowing us to introduce aspects like a universal power supply containing both high and low voltages and a processor with a power comparable to or greater than that that of most smart phones.

‘And by reducing the core amounts of copper and magnets required, we greatly reduce the core carbon footprint of manufacture, keep the unit weight low which reduces the required infrastructure costs.’ 

James and Tony formed Rift Technology in 2011 and set about the task of developing working prototypes to test their proposition.

‘The workshop became full of deconstructed actuators and parts were strewn all over the floor of every room in Dad’s house,’ James explains. ‘In the end the family forced us to move everything into two workshops below the house. But every time we created an actuator, we were able to show the same amazing results and we were able to make demonstrations to
potential investors and partners. We used to joke that every time someone saw the tests performed, they ended up being ‘Rifted’. That club is growing by the day and each person is amazed to see the results.’

The path to manufacturing the very first ‘Rift Driven’ product has been complex. Innovating is a difficult task during recessionary times and the team really got to know the true meaning of the credit crunch. James says: “The banks were simply not prepared to help out and every potential investor wanted just too much equity to make the long-term proposition appealing. We’ve seen a variety of funding solutions but in the end, we have focused on raising our own private capital to get to a position where we can start shipping actuators.

‘If possible we would like to keep manufacture of this in the UK and create wealth and opportunities locally. We all live in Worcestershire and it would be great if we are able to keep producing our actuators in the county.’

James and Tony met with partners to help create the parts for the first actuators and the very first units came off the production line in August, 2013.

Meanwhile the Smart Actuator company was founded to market and distribute the new actuator and the company immediately received plaudits. The company was given an award by the local Chamber of Commerce for its innovation and the parent company received support from an unlikely supporter. Motor sport legend John Surtees saw a demonstration and offered his support to help take the technology to a wider audience. The team at Rift Technology are now looking forward to meeting with global motor manufacturing partners to look at offering the technology to Formula 1 and eventually volume production cars.

While many interested parties are making their way to Malvern to see the motor test for themselves, much of the team’s efforts is spent delivering the very first actuators off the production line.

James adds: ‘Like all new products, there are teething problems and the inevitable hiccups. However, it is great to see that every actuator coming off the production line shows the same great performance. We are now looking at new materials to make the actuator last longer as well and we are fully expecting this to be simply the best actuator available for a wider range of tasks’.

‘We are in the process of taking our prototypes out to our global sales partners and we are booking up space at exhibitions to start shifting product’.


‘It’s been an incredibly intense journey, but we all hope that once the word starts getting out, our order book will be full for many years to come.’

Smart Actuator Features

Smart Actuator Features

We are proud of the fact that Smart Act Actuators are both feature rich yet simple and easy to setup, install and maintain.

With a price point that can’t be matched and an unbeatable Energy Saving these two things alone should make this your first choice in Electric Actuation.

Our innovative RIFT Motor technology means that in every comparison test run we can save you money in operation through energy efficiency. This makes SmartAct Actuators almost self financing in the long run but also working towards our vision of saving the planet by consuming energy more efficiently.

Unbeatable Price Point

SmartAct products have a relatively low manufacturing cost compared to lots of competitors so we can be competitive on price whilst also offering some extra features – no addon’s required. Just an update. These features range in price but again are very competitively priced.

Easy Setup, Install & Maintenance

We have truly Smart technology inside our actuators. Making the job of installation, setup and maintenance so much easier simply connect your actuator to our easy to use app and your control is at your fingertips.

Read all about our Promotion for our new Small 0 – 30 Nm Actuator here [small promo]

Falling in Love with the most hated day of the week – Loving Monday’s

Falling in Love with the most hated day of the week – Loving Monday’s

So apparently according to a variety of google results it is pretty across the board that most people hate mondays!

I feel really sorry for monday but there is some scientific stuff about why this happens.

Some of it is about the fact that most of us are actually sleep deprived during the week. So we sleep in even just for an hour or so at the weekend and this adjusts our body clock making Monday mornings harder to wake up on.

There is a large emotional shift that takes place from sunday to monday. For most of us we go from relaxing, spending time with family, taking part in hobbies or having adventures to work and although we don’t all hate our jobs (for the record I LOVE mine) and monday’s are no more stressful or depressing than say a tuesday or friday we still compare it to sunday when we had time to do what we wanted.

We suffer the Monday blue’s. We wish it was Friday. We cannot help procrastinate and end up just a little less productive maybe. Apparently we are actually more likely to be ill on Monday’s than any other day. So what can we do to start to love Monday again.

Love your Mondays!

1) Don’t work at the weekend.

Or whichever days you have off. Don’t feel tempted to check your emails, or open that report up. Taking a break means you have a more enjoyable couple of days away and getting back to it on monday seems less of a constant grind. You deserve that me time so take it.

2) Start Monday morning’s with your favourite breakfast.

Why not have that extra slice of buttered toast or extra fruit on your granola. If it’s a smoothy then make it your favourite one. Having your favourite breakfast might just be the little thing that puts you in a better mood about the whole day. You are your own influencer here. Only you can adjust your mood so go on treat yourself.

3) Approach monday as a fresh start to the week not just back to the grind.

Start setting weekly goals that you can get done by the end of the week so you have that sense of accomplishment come friday and know that monday is when you do your new task list for the week. I am a big lover of lists & planning so I always sit down after our big group team meeting & hold a mini meeting with my team & we all write up our goals & tasks for the week. It feels really good to know that monday morning is planning & goal setting. Adding simple things to this task list that can be easily ticked off helps the week feel productive. I have even been known to have – write a list of things to do on my list 🙂 That sounds funny but it motivates me to keep on top of the things I am doing. On last weeks list I had write an article about monday’s (because I came in last week needing a boost).

4. Meal prep on Sunday

I quite often plan a slow cooker meal for mondays so I know I can get it all ready before work and return to a cooked meal. It makes monday’s feel so much easier knowing I can go home and stick the kettle on without having to wonder what I am feeding my family. Yes I have a list !

5. Don’t schedule too much on a weekend unless it’s a treat.

Warwick Castle

So this one is an odd one. Try to keep your weekend free of responsibility, you have enough of that during the week. It is not always easy as often if you are like me I have a list of errands to run but I now try to do as many of these during the week around work and school hours. I leave my weekend for relaxation & play time. On the subject of play time why not have a mini adventure or a day trip out. Something totally different to take your mind off work. We find that a mini break (usually friday night to saturday night) make it feel like we had a mini holiday. We all go back to school or work on monday feeling quite excited about what adventures we had.

Our last adventure was a night at Warwick Castle. We stayed in the newly built wooden lodges in the Knights Village. We had an amazing time. We crossed swords with the Warwick Knights and had dinner in the medieval banquet hall as well as getting 2 days to explore. We stayed on the friday night so we still had sunday to relax at home. It felt just like a mini holiday and going back to work monday I felt really relaxed & chilled & ready to get into my list of things to do.

Loving Mondays is all about mindset

Whatever you do in life really your own attitude is the one thing you have control over. It is up to you to choose to look for the positives not the negatives but you are not alone in that monday blue mood so really all the little things that you can do to lift that mood and make the start of a fresh week something to look forward to instead of something to dread can make such a difference to your whole working experience.

Good luck & let’s start loving mondays.

This article was originally written by Tonya O’Donnell for LinkedIn. You can see the article here [ https://www.linkedin.com/pulse/falling-love-most-hated-day-week-loving-mondays-tonya-o-donnell/ ]

Valve Solutions Large Actuators Order June 2019

SmartAct welcome a new Irish Distributor.

SmartAct & Valve Solutions

SmartAct are pleased to announce that we will be working with a new distributor in Ireland.  Valve & Actuator Solutions Ireland is based in County Kildare.

Valve Solutions Ireland

Valve & Actuator Solutions Ltd

Valve Solutions is a leading supplier of Valves, Actuators, Flood and Flow Control Equipment with over 30 years experience in the Water & Waste, Petrochem, Food and Pharmaceutical industries.

They will be working with our full range of products and have already worked with our Actuation specialists on solutions for a couple of new projects over the last few months.

We sent an order out this week of our Large 200NM SmartAct Actuators.